Топ-10 конкурентов motor-king.com

autopartsway.com

auto parts at auto parts way. buy auto parts online from a trusted auto part source.

go-parts.com

Bright; OEM #8161089145

ecklersmbzparts.com

1-800-961-1328

carid.com

car accessories and replacement auto parts that define your vehicle's true identity. check out our automotive aftermarket selection for the ride of your life!

am-autoparts.com

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer. FREE Shipping is standard on most parts shipped to the lower 48 States (Contiguous United States). Select lighting parts excluded. Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada for this item. Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.

germanautosolutions.com

Please use the "Applications" tab to verify that our cap fits your BMW.Catastrophic cooling system failures are a fairly common problem on BMW vehicles. The problem is related to the cooling system maximum relief pressure that BMW has chosen to run, coupled with an almost entirely plastic set of cooling system components.Most BMW vehicles manufactured between 1982 and 2006 run a cooling system vent pressure of 2.0 bar (29 psi). The problem is that the cooling system components are barely rated to handle that pressure when brand new. As the plastic parts heat cycle hundreds of times while exposed to the degrading effects of heat and coolant, they lose some of their strength. The result can be a ruptured part somewhere in the cooling system.As you can see from the picture gallery, ruptures can occur in the radiator tanks, expansion tank, thermostat housing and coolant hoses. Not only can a failure leave you stranded somewhere that you would rather not be stranded, but these engines are very prone to cylinder head warping and cracking when severely over heated. The number one cause of very expensive cylinder head failures is severe over heating during a cooling system failure.So what is the solution? The system does not need to vent at that high of a pressure. In fact the industry standard for cooling system vent pressure is 1.0 to 1.4 bar. After doing extensive research and beta testing on several BMW engines, we decided on an optimum pressure of 1.2 bar. This pressure is high enough to maintain OEM pressure specifications up to 126 degrees Celsius  (260F), which means that our cap will not alter your  cooling system efficiency in any way. Apparently even BMW has seen the light, since most current BMW models now come equipped with a 1.2 bar cap.This German Auto Solutions cap will limit the maximum internal coolant pressure to 1.2 bar (17.5 psi) instead of the OEM spec of 2.0 bar (29 psi). Even something as simple as overfilling the coolant recovery tank a little highe

emagazinuldescule.ro

"Srbi, sakrijte se iza kauča, vaš Đoković je istrošen i gotov".Glasila je poruka Sajmona Brigsa, jednog od glavnih mrzitelja Novaka Đokovića

iatn.net

Answers to some of iATN's most frequently asked questions.

bba-reman.com

Discover cost-effective solutions for automotive electronics repair and exchange at Remanx. Explore our catalog of common failure products and enjoy next-day delivery on parts exchange. Choose Remanx for fast, affordable, and reliable automotive repair services.

partstrain.com

We are CarParts.com. As a technology-driven eCommerce company, we are dedicated to improving the way drivers shop for the parts they need. Operating for over 25 years, we offer over 1 million high-quality automotive parts and accessories,…