取得演示
Now livetag icon
Gifting Season: The Hottest Demand Trends Now & Into 2027!Get the full report nowbanner icon

11月19日 的 Magedori: Conduit Bending Calc 應用程式分析

Magedori: Conduit Bending Calc

Magedori: Conduit Bending Calc

  • Daisuke Yamaguchi
  • Apple App Store
  • 付費
  • 生產力
Stop hunting through preset lists for your bender. Make one test bend and the app learns how your bender actually bends. From then on, the numbers match the pipe. CALIBRATE TO YOUR OWN BENDER Benders of the same size bend differently with make, age, wear and the hand on the handle. Book values drift. Bend a 90° on a scrap piece, measure it once, and the app works out your real centerline radius for that size and keeps it. EIGHT BENDS • 90° stubs and any-angle bends • Kicked 90°: marks for the 90° and the kick, distance between them, shrink along the run • Offsets with distance between marks and shrink • Rolling offsets (new in 1.5): enter the rise and the roll, get the true offset, how far to roll the pipe, and both marks • 3-point saddles • 4-point saddles • Single bends at any angle • Parallel runs: how far to shift each mark MARKS FROM THE PIPE END, IN ORDER Results are a list of distances measured from the end of the pipe: ① bend start ② bend end ③ cut. Lay your tape along it and mark. Choose whether you measure to the back, the center or the inside, and the red line in the drawing moves to show you. TOLD WHY IT WON'T BEND, AND WHAT WILL If two arcs would overlap, the app says so, says by how much, and offers an angle that works. One tap switches to it. EMT, IMC AND RIGID, IN INCHES All ten trade sizes from 1/2" to 4" for EMT, IMC and RMC, with fractions to 1/16". Metric steel conduit (EN 61386) and Japanese JIS conduit are included too, in millimeters. NEC RADIUS CHECK Warns when the centerline radius falls below NEC Chapter 9 Table 2. BUILT FOR THE JOB SITE • No sliders. Type numbers on the keypad or tap +/- steps • Every feature works underground or with no signal • What you enter never leaves your device. To improve the app, only anonymous usage data (such as which screens are opened) is counted with Google Analytics (you can turn this off in Settings). • No ads, no in-app purchases. One-time purchase, everything included • Save calculations to history Results are a guide. Final dimensions and code compliance are the responsibility of qualified personnel following local rules and your AHJ. Requires iOS 17 or later. iPhone and iPad.
Magedori: Conduit Bending Calc

商店排名

商店排名基於Google和Apple設定的多個參數。

所有類別 在
美國--
生產力 在
美國--
建立帳戶即可查看平均每月下載次數聯絡我們

隨時間變化的 Magedori: Conduit Bending Calc 排名統計

Similarweb 的使用排名和Apple App StoreMagedori: Conduit Bending Calc排名

排名

無可用數據

Magedori: Conduit Bending Calc按國家/地區排名

Magedori: Conduit Bending Calc 在其主要類別中排名最高的國家


的頂級競爭對手和替代方案

來自同一應用商店,有很高可能被相同使用者使用的應用程式。

Nesto

Nesto

Daisuke Yamaguchi

Truemark: Conduit Bender

Truemark: Conduit Bender

Huseyin Iris

ConduitWorker: Conduit Bending

ConduitWorker: Conduit Bending

Vikorus, LLC

ARCA ELECTRICA 電気工事ツール

ARCA ELECTRICA 電気工事ツール

daizou sakurai

Magedori: Conduit Bending Calc VS.

11月 19, 2026