You’ve hit your search limit
Start your free trial to keep exploring full traffic and performance insights.
Get Started- Home
- Analyses d’applications gratuites
- Magedori: Conduit Bending Calc
Analyse de l'application Magedori: Conduit Bending Calc pour le 19 novembre
Magedori: Conduit Bending Calc
- Daisuke Yamaguchi
- App Store Apple
- Payant
- Productivité
Stop hunting through preset lists for your bender.
Make one test bend and the app learns how your bender actually bends. From then on, the numbers match the pipe.
CALIBRATE TO YOUR OWN BENDER
Benders of the same size bend differently with make, age, wear and the hand on the handle. Book values drift. Bend a 90° on a scrap piece, measure it once, and the app works out your real centerline radius for that size and keeps it.
EIGHT BENDS
• 90° stubs and any-angle bends
• Kicked 90°: marks for the 90° and the kick, distance between them, shrink along the run
• Offsets with distance between marks and shrink
• Rolling offsets (new in 1.5): enter the rise and the roll, get the true offset, how far to roll the pipe, and both marks
• 3-point saddles
• 4-point saddles
• Single bends at any angle
• Parallel runs: how far to shift each mark
MARKS FROM THE PIPE END, IN ORDER
Results are a list of distances measured from the end of the pipe: ① bend start ② bend end ③ cut. Lay your tape along it and mark. Choose whether you measure to the back, the center or the inside, and the red line in the drawing moves to show you.
TOLD WHY IT WON'T BEND, AND WHAT WILL
If two arcs would overlap, the app says so, says by how much, and offers an angle that works. One tap switches to it.
EMT, IMC AND RIGID, IN INCHES
All ten trade sizes from 1/2" to 4" for EMT, IMC and RMC, with fractions to 1/16". Metric steel conduit (EN 61386) and Japanese JIS conduit are included too, in millimeters.
NEC RADIUS CHECK
Warns when the centerline radius falls below NEC Chapter 9 Table 2.
BUILT FOR THE JOB SITE
• No sliders. Type numbers on the keypad or tap +/- steps
• Every feature works underground or with no signal
• What you enter never leaves your device. To improve the app, only anonymous usage data (such as which screens are opened) is counted with Google Analytics (you can turn this off in Settings).
• No ads, no in-app purchases. One-time purchase, everything included
• Save calculations to history
Results are a guide. Final dimensions and code compliance are the responsibility of qualified personnel following local rules and your AHJ.
Requires iOS 17 or later. iPhone and iPad.
Classement dans le store
Le classement des stores est basé sur plusieurs paramètres définis par Google et Apple.
Toutes les catégories dans
États-Unis--
Productivité dans
États-Unis--
Créez un compte pour voir les téléchargements mensuels moyensContactez-nous
Statistiques de classement dans le temps pour Magedori: Conduit Bending Calc
Classement d'utilisation et classement Apple App Store de Similarweb pour Magedori: Conduit Bending Calc
Classement
Aucune donnée disponible
Ranking par pays pour Magedori: Conduit Bending Calc
Pays dans lesquels Magedori: Conduit Bending Calc est le mieux classé dans ses principales catégories
Principaux concurrents & apps alternatives
Applications ayant une forte probabilité d'être utilisées par les mêmes utilisateurs, à partir du même store.
Nesto
Daisuke Yamaguchi
Truemark: Conduit Bender
Huseyin Iris
ConduitWorker: Conduit Bending
Vikorus, LLC
ARCA ELECTRICA 電気工事ツール
daizou sakurai
novembre 19, 2026